The U.S. Army TMDE Activity (USATA) has a requirement to purchase of two (2) Wind Tunnels that will be used by USATA Engineers and Technicians to provide OCONUS support to customers owning wind speed measuring devices (hot-wire anemometers). Industrial hygiene and chemical testing facilities are impacted by the increased turn-around time of sending their equipment to the APSL. The Wind Tunnels shall include the following specifications or equivalent (if not brand name): Requirements: • The wind tunnel shall generate air speeds ranging from 1.5 to 50 m/s. • Air speed measuring equipment shall be provided and shall have a total measurement uncertainty less than or equal to 0.75% of reading. • The wind tunnel test chamber shall have cross sectional dimensions of 4 x 4 inch at minimum, and 12 x 12 inch at maximum. • The wind tunnel shall produce turbulence intensity that is less than or equal to 1%. • The wind tunnel shall have maximum dimensions of 10 x 3 x 6 feet LWH when assembled. The wind tunnel shall be able to fit through a standard 32-inch width door. • The wind tunnel design shall be open circuit if a closed-circuit design is not available within budget. • For designs greater than 45 kg, the wind tunnel shall be built on a frame with casters. • The wind tunnel’s motor shall not exceed 90 dB when generating speeds of 50 m/s. • The wind tunnel’s motor shall be powered on a 220V 16A single phase line. Support and Accessories • The wind tunnel shall be shipped to TMDE Support Center (TSC) Kaiserslautern, Germany and TSC Camp Carroll, South Korea. • Measuring equipment requires organic calibration support. Any calibration procedure/software required shall be provided. • All software shall not require an annual subscription or online connection. If software does not have a transferable license, a computer shall be provided to operate it. • Operating software shall be able to report standard and actual wind speed. It shall also be able to correct for different pressure and temperature conditions. • Operating software shall be able to export data from test runs.
¿Calificás como pequeña empresa? El tope de facturación o empleados para el NAICS 334519 lo define la SBA y cambia con el tiempo — lo más seguro es confirmarlo ahí, no acá. Verificar en sba.gov ↗
Empresas que ganaron awards con este mismo NAICS — datos públicos de USAspending, no una recomendación ni un dato oficial.
Creá tu cuenta para ver documentos con resumen, punto de contacto, guardar esta oportunidad en tu pipeline y recibir alertas antes del cierre.
Crear cuenta gratisGovBidder Connect no es una agencia gubernamental. Esta información se agrega de fuentes oficiales de dominio público y puede tener demoras o errores. Verificá los datos en la fuente oficial antes de actuar.